Why It is Necessary to Contact Scaffolders in Bromley During Construction

No matter, if it is a domestic or commercial site, if you are to undertake a construction project, the very first service that you should avail is scaffolding. It is important to ensure the proper safety of the builders, electricians and other contractors who would be working on site.

The use of scaffolds at construction sites has increased immensely in the past few years as people don’t want to put themselves in legal troubles by ignoring the preventive measures. So, whether it is a small project or a big one, it is very important to contact experienced and professional Scaffolders in Bromley.

How Safety Can Be Ensured By Using Scaffolds

Adds Stability

Scaffolding provides a level area to walk on so that the job can be done by reducing the risk of falling and injuring. The structure being stable enables the workers to have a secure place to work. If it is at a great height where the workers need to carry out the task, then it is a much-needed service. At high altitude, the blow of winds may cause the loss of balance. But with a steady base workers will not fell unsteady.

Creates Proper Positions

Another benefit of having the structure is to gain a great position to work. Although you can reach any height by using ladders, they are not at all as stable as scaffolds. A proper balance would allow the workers to reach any place they want without compromising safety. It also allows proper positions for multiple workers to work side by side.

Helps to Reach Difficult Places

The structure can cover the entire building and has several steps. This is why it becomes easy for the workers to work on the places where it is very difficult to reach.

Enables to Access Any Height

The modern structures are movable and this allows the workers to reach any height with one single unit. It also helps to carry out multi-work that means you will be able to get your job done quickly.

Scaffolders in Bromley

Materials Used to Build the Structure

• Tarpaulins,
• Safety nets,
• Safety barrier netting,
• Scaffold net
• Herace fence tarps

What You Should Look for in Professional Scaffolders

• They should be responsible for both designing and installation.
• Should build the gantries, truss outs and cantilever drops.
• The tasks of shoring up and support should also be done by them.
• Should build the structures around the chimney stacks.
• Responsible for providing temporary roofing solution.
• Should restore and renovate the scaffolds.
• Should be available 24 hours.
• Various types of scaffolds, namely birdcage scaffold liftshaft scaffold should be provided by them.
• Must work with both traditional temp roof and haki roof system.
• Should provide heavy-duty support.
• The installation of scaffolding alarm systems should also be done by them.

Reputable and reliable the two words should be associated with the professional that you are going to hire to get your job done. Apart from this, the company should be insured and have health and safety advisor. Lastly, it should provide you free quotations.

5 Scaffolding Silly Mistakes OSHA Recommends to Avoid at All Costs

Did you know the job of a construction worker is counted amongst the world’s most dangerous? And scaffolding is one of those many aspects that make the job even more perilous. Want to know what’s an everyday hazard in this world? – A fall to death!

Any idea how all this bad can be bettered? Well, stay safe and avoid the common mistakes, what else?

Let’s talk about some Scaffolding

Disclaimer: None of this is made up here. It’s what the Occupational Safety and Health Administration (OSHA) suggests. And it’s what everyone should be following.

#1: Avoid inappropriate fall protection.

Like we discussed, this is the most common mistake that leads to the most common hazard. However, you’ll be surprised to know that it is not the fall that results in death. Often, it is the lack of proper protective measures cause the fatality.

• According to OSHA, a project of scaffolding in Sidcup or any other area must have fall protection if the structure is at a height of 10 feet or more.
• It further says that a worker must use only the most proper access to the structure, especially, if it is at a height of 2 feet or above.
• All ladders in the structure must be attached as per OSHA guidelines.
• For additional protection, workers should wear a helmet and shoes that are non-slip.
• Working on structures that are ice-covered on working under bad weather conditions are forbidden.

#2: Never build scaffolds that do not meet standard specifications.

Whenever there’s a scaffold collapse in news, surmise that it’s because of an improper built. The structures not built to specifications laid by OSHA are precarious and can lead to terrible accidents. No matter how much you train your workers, a weak structure will spare none.

• OSHA says that each component of the structure should have the ability to pull its own weight.
• Additionally, each component should also be able to pull a weight that’s four times that of the intended load.
• OSHA has laid a detailed guideline regarding which components should be used; the detail includes the types of materials as well.
• Furthermore, it says that the structure should be validated by a qualified person; any kind of overload should be discouraged.

#3: Don’t neglect hazards from falling objects.

Fall to death is common and so is an injury (often fatal) from falling objects. Even those not working on the structure could get injured. Think about this – what if a certain utility tool drops from above? Think about the speed at which it is going to hit a worker. Dangerous!

• OSHA has specified certain requirements regarding toe boards. For instance, it emphasises on the placement of safety netting under the structure so that falling objects are saved from hitting the ground (actually, people).
• Helmets are recommended for all workers, especially those working on the lower levels.
• Additionally, debris on the working platform should be cleared at the earliest so that there’s nothing left that can fall.

#4: Stop hiring untrained workers.

Erecting scaffolds and working on them is definitely not a menial job. Remember the ‘world’s dangerous’ tag? You should hire workers who are skilled and trained. Better if you train them. Those who don’t know their way around can cause trouble for others as well.

• According to OSHA, anyone who has taken up such a project must educate his employees on all safety and protection measures.
• Those designated for the job should be familiar with OSHA guidelines regarding how to erect, shift, and dismantled, and shift the structure.

#5: If there are electrical setups in the vicinity, don’t ignore them.

After nasty falls, fatal collapses and deadly falling objects, here’s another peril that often goes disregarded. It’s the hazard of getting electrocuted. Workers working on the structures often suffer electrical shocks. Okay, this is not a common issue; but in no way is it rare. And it’s really, really death-dealing.

• OSHA speaks about guidelines related to power lines. It has defined a certain amount of clearance space that should be present between the structure and the electrical setups.
• The measure of this space varies as per insulated and non-insulated power lines.
• All electrical connections in utility units should be fault-free and proper.
• The use of electrical conduits in the structure’s components, especially in the form of anchoring points, is strictly prohibited.

In the year 2014-15, there were 69 reports of accidents caused by scaffolds. In each, the victim’s period of recovery was reported to exceed a week’s time. 36 of the cases included major injuries. And who knows, perhaps the actual number of accidents was even higher.

You don’t want to contribute to this bad news, do you? So, why not follow all the OSHA rules and contribute to a healthy construction atmosphere instead? Think, think.