It is much easier to work on scaffolding while constructing a high rise building than to do it with a ladder. The plain surface on which the scaffolding rests reduces the chances of toppling down. Eltham has the best of scaffoldings in the local area, so let’s just view the steps to work with the scaffolding safely while putting it up:
Step 1:Rent scaffolding for those high jobs
It is advisable that you rent scaffolding the next time you have a work up high, rather than struggling with the ladders. Working with scaffolding provides you with a stable platform where you can stack all your materials and tools and go to and fro for the construction purpose.
Step 2: Assemble the frame and base
The frame and the base are the important things serving as the foundation of scaffolding. Start beginning with the assembly by laying both the frames almost 7 ft. apart from the working area. Start putting up the screws and base plates or casters so you will be saved from the extra hard work that you have to put up with scaffolding to put them in for later use.
Even though the basic setup procedure is the same, scaffold hardware varies slightly from one manufacturer to the next. Adjusting screws make the leveling of all scaffolding in Eltham easy and safe.
Step 3: Add planks and guardrails
Now to add the planks and guard rails, you have to lift the scaffold planks from the middle and place the frames and adjust until they are above the frame. Now secure it with the swivel catches.
Always remember that you should not use ordinary wooden planks because they are not strong enough. They can anytime take their last breath and your life will be in danger. Therefore, it is suggested that you do not get tempted by the idea of saving money and use good quality planks.
Step 4: Scaffolding accessories and tips
Once it is set up, speed up your work and start working on it. Though the casters give the allowance to the scaffolders to move easily but still a few precautions should be remembered.
- Ask the supplier to place a horizontal plate diagonally between the two outside frames to make them a square.
- Do not roll on the scaffolding with heavy load
- Be sure to lock the casters before climbing up
- Be careful of the electric wires while you are moving upward.
- Never roll the scaffolding on steep slopes or near to any holes.